Yamaha FS-TA TransAcoustic Acoustic Guitar
For your consideration, Garrett Park Guitars presents this??Yamaha FS-TA TransAcoustic Acoustic Guitar in Vintage Natural finish.
Yamaha FS-TA TransAcoustic guitars transport you to new creative spaces with immersive reverb and lush chorus effects without needing an amp or other external gear. Great for fingerpicking, the concert body FS-TA features a solid spruce top with mahogany back and sides. It delivers rich warmth and resonance while maintaining excellent tone.
- Concert size body design
- Solid spruce top
- Mahogany back and sides
- New scalloped bracing for louder, richer acoustic sound
Features:
Actuator: An actuator installed on the inner surface of the guitar back vibrates in response to the vibrations of the strings. The vibrations of the actuator are then conveyed to the body of the guitar and to the air in and around the guitar body, generating authentic reverb and chorus sounds from inside the body.
Simple Controls:
Three simple knobs let you adjust the amount of effects and the line out volume level. Keeping the controls small minimizes the area of the holes in the body material, which reduces acoustic sound loss.
(A) Chorus Control
(B) Reverb Control (Room / Hall)
(C) TA Switch / Line Out Volume Control
* Pressing the TA Switch for longer than 0.3 seconds activates the TA function.
* When a cable is connected to the line out jack, the line out volume can be adjusted by rotating knob (C).
* The reverb type switches from Room to Hall around the 12:00 position.
Designed to Provide Superb Acoustic Sound
The body is a solid spruce top with mahogany back and sides guitar based on the FG-series.
Louder and stronger sound in the low- to mid-ranges, thanks to cutting-edge acoustic analysis technology developed by the Yamaha R&D Division and a newly-designed scalloped bracing pattern.
Newly Designed Battery Port
The battery box integrated into the end-pin jack requires fewer holes in the body. This reduces acoustic sound loss. Connect the cable from the jack to a PA or amp to use as an acoustic-electric guitar.
FS-TA | |||||||
---|---|---|---|---|---|---|---|
General Specifications | |||||||
Body Shape | Concert | ||||||
Scale Length | 25 " (634 mm) | ||||||
Body Length | 19 9/16 " (497 mm) | ||||||
Total Length | 40 3/16 " (1021 mm) | ||||||
Body Width | 14 15/16 " (380 mm) | ||||||
Body Depth | 3 9/16 " - 4 5/16 " (90-110 mm) | ||||||
Nut Width | 1 11/16 " (43 mm) | ||||||
String Spacing | 0.39 " (10.0 mm) | ||||||
Top Material | Solid Spruce | ||||||
Back Material | Mahogany | ||||||
Side Material | Mahogany | ||||||
Neck Material | Nato | ||||||
Fingerboard Material | Rosewood | ||||||
Fingerboard Radius | 15 3/4 " (R400 mm) | ||||||
Bridge Material | Rosewood | ||||||
Nut Material | Synthetic | ||||||
Saddle Material | Synthetic | ||||||
Bridge Pins | Black ABS with White Dot | ||||||
Tuners | Die-Cast Chrome(TM29T) | ||||||
Body Binding | Cream | ||||||
Soundhole Inlay | Black + White | ||||||
Pickguard | Transparent | ||||||
Body Finish | Gloss | ||||||
Neck Finish | Matte | ||||||
Electronics | SYSTEM70 TransAcoustic + SRT Piezo Pickup | ||||||
Controls | Reverb / Chorus / TA Switch / Line Out Vol | ||||||
Connections | Line Out | ||||||
Strings | Elixir NANOWEB 80/20 Bronze Light | ||||||
Accessories | Hex Wrench, 2 x AA Batteries | ||||||
Case | None |
- * Measured from the center of one bridge pin to the center of the next bridge pin.
Please call, chat, or email for more information.